 |
| Quantity: | |
|---|---|
Polyethersulfone (PES), Nylon, Polytetrafluoroethylene (PTFE), Polypropylene (PP), Mixed cellulose (MCE), Polyvinylidene fluoride (PVDF)
Pharmaceutical, Microelectronics, Laboratory
The SHFA capsule filter is produced in 100,000 clean workshops, strictly implementing ISO13485& IOS9001 quality system. It is widely used in small batch fluid filtration in laboratory.
Features and Benefits
Compact structure, solid housing
Disposable design, convenient and practical
Excellent heat resistance
Absolute precision filter membrane
Application
Various laboratory small batch fluid filtration processes
Filtration Area
1.1ft /2.5”, 2.2ft/5”
Operating Conditions
Max. Temperature:60℃
Maximum Operating Pressure:
3.5 bar@23℃; 3.0 bar@60℃ (Liquid)
3.0 bar@23℃; 2.5 bar@60℃（air）
Materials of Construction
Filter Media: PES/PTFE/Nylon/PP/MCE/GF/PVDF
Cage & Support & End Caps: PP
Drainage：PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Size
Housing diameter (mm) : φ70
Length(in) : 2.5”/5”/10”
Connection (Hose barb)
Inlet: 13.6mm
Outlet: 13.6mm
Removal Ratings (μm)
0.1, 0.22, 0.45, 0.65, 0.8, 1.2, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Material | Rating(μm） | Length（in） | Seal |
SHFA | P=PP | 01=0.1 | 02=2.5 | S= Silicone |
M=MCE | 022=0.22 | 05=5 | E= EPDM | |
N=Nylon | 045=0.45 | 1=10 | ||
T=PTFE | 065=0.65 | |||
TL=Hydrophilic PTFE | 1=1 | |||
V=PVDF | 3=3 | |||
VL=Hydrophilic PVDF | 10=10 | |||
G=GF | 0202=0.22+0.22 | |||
0204=0.22+0.45 |
The SHFA capsule filter is produced in 100,000 clean workshops, strictly implementing ISO13485& IOS9001 quality system. It is widely used in small batch fluid filtration in laboratory.
Features and Benefits
Compact structure, solid housing
Disposable design, convenient and practical
Excellent heat resistance
Absolute precision filter membrane
Application
Various laboratory small batch fluid filtration processes
Filtration Area
1.1ft /2.5”, 2.2ft/5”
Operating Conditions
Max. Temperature:60℃
Maximum Operating Pressure:
3.5 bar@23℃; 3.0 bar@60℃ (Liquid)
3.0 bar@23℃; 2.5 bar@60℃（air）
Materials of Construction
Filter Media: PES/PTFE/Nylon/PP/MCE/GF/PVDF
Cage & Support & End Caps: PP
Drainage：PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Size
Housing diameter (mm) : φ70
Length(in) : 2.5”/5”/10”
Connection (Hose barb)
Inlet: 13.6mm
Outlet: 13.6mm
Removal Ratings (μm)
0.1, 0.22, 0.45, 0.65, 0.8, 1.2, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Material | Rating(μm） | Length（in） | Seal |
SHFA | P=PP | 01=0.1 | 02=2.5 | S= Silicone |
M=MCE | 022=0.22 | 05=5 | E= EPDM | |
N=Nylon | 045=0.45 | 1=10 | ||
T=PTFE | 065=0.65 | |||
TL=Hydrophilic PTFE | 1=1 | |||
V=PVDF | 3=3 | |||
VL=Hydrophilic PVDF | 10=10 | |||
G=GF | 0202=0.22+0.22 | |||
0204=0.22+0.45 |
