 |
| Quantity: | |
|---|---|
Polyethersulfone (PES), Nylon, Polytetrafluoroethylene (PTFE), Polypropylene (PP), Mixed cellulose (MCE), Polyvinylidene fluoride (PVDF)
Pharmaceutical, Microelectronics, Laboratory
The SNHFE capsule filter is produced in 100,000 clean workshops, strictly implementing ISO13485 & IOS9001 quality system. It is widely used in biopharmaceutical, diagnostic reagents, medical equipment and other fields.
Features and Benefits
Compact structure, inner design without dead corners
Disposable design, convenient and practical
Absolute precision filter membrane
Tightness: High standards of quality assurance and cleanliness are applied in the production process. The manufacturing process is consistent with ISO13485:2016 requirements.
Application
Various laboratory small batch fluid filtration processes
Operating Conditions
Max. Temperature:60℃
Maximum Operating Pressure:
3.5 bar@23℃; 3.0 bar@60℃ (Liquid)
3.0 bar@23℃; 2.5 bar@60℃（air）
Materials of Construction
Filter Media: PES/PTFE/Nylon/PP/MCE/GF/PVDF
Cage & Support & End Caps: PP
Drainage: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Size
Housing diameter (mm) :φ70
Length(in): 2.5"/5"/10"
Connection (Hose barb adapter)
Inlet: 13.6mm
Outlet: 13.6mm
Removal Ratings (μm)
0.1, 0.22, 0.45, 0.65, 0.8, 1.2, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Material | Rating(μm） | Length（in） | Seal |
SNHFE | P=PP | 01=0.1 | 02=2.5 | S= Silicone |
M=MCE | 022=0.22 | 05=5 | E= EPDM | |
N=Nylon | 045=0.45 | 1=10 | ||
T=PTFE | 065=0.65 | |||
TL=Hydrophilic PTFE | 1=1 | |||
V=PVDF | 3=3 | |||
VL=Hydrophilic PVDF | 10=10 | |||
G=GF | 0202=0.22+0.22 | |||
0204=0.22+0.45 |
The SNHFE capsule filter is produced in 100,000 clean workshops, strictly implementing ISO13485 & IOS9001 quality system. It is widely used in biopharmaceutical, diagnostic reagents, medical equipment and other fields.
Features and Benefits
Compact structure, inner design without dead corners
Disposable design, convenient and practical
Absolute precision filter membrane
Tightness: High standards of quality assurance and cleanliness are applied in the production process. The manufacturing process is consistent with ISO13485:2016 requirements.
Application
Various laboratory small batch fluid filtration processes
Operating Conditions
Max. Temperature:60℃
Maximum Operating Pressure:
3.5 bar@23℃; 3.0 bar@60℃ (Liquid)
3.0 bar@23℃; 2.5 bar@60℃（air）
Materials of Construction
Filter Media: PES/PTFE/Nylon/PP/MCE/GF/PVDF
Cage & Support & End Caps: PP
Drainage: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Size
Housing diameter (mm) :φ70
Length(in): 2.5"/5"/10"
Connection (Hose barb adapter)
Inlet: 13.6mm
Outlet: 13.6mm
Removal Ratings (μm)
0.1, 0.22, 0.45, 0.65, 0.8, 1.2, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Material | Rating(μm） | Length（in） | Seal |
SNHFE | P=PP | 01=0.1 | 02=2.5 | S= Silicone |
M=MCE | 022=0.22 | 05=5 | E= EPDM | |
N=Nylon | 045=0.45 | 1=10 | ||
T=PTFE | 065=0.65 | |||
TL=Hydrophilic PTFE | 1=1 | |||
V=PVDF | 3=3 | |||
VL=Hydrophilic PVDF | 10=10 | |||
G=GF | 0202=0.22+0.22 | |||
0204=0.22+0.45 |
