 |
| Quantity: | |
|---|---|
Nylon
Fine Chemical
The manufacture process of FPN series filter cartridge from film production, injection molding, assembly manufacturing, internal packaging is in the whole process of 100,000 clean workshop. It is a cost-effective product and is widely used in the chemical industry.
Features and Benefits
Self-produced materials, cost-effective
Broad chemical compatibility
High cleanliness
Excellent heat resistance makes high temperature sterilization safer and more effective
Application
Filtration of oily fluids such as silicone oil
Organic solvent filtration
Materials of Construction
Membrane：Nylon
Cage & Support & End Caps：PP
O-rings/Gasket：Silicone/Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.62 m2 /10”
Dimensions
Outer Diameter：68mm
Length（in）：10, 20, 30, 40
Removal Ratings (μm)
0.1，0.22，0.45，1.0，3.0，5.0
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCN | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |
The manufacture process of FPN series filter cartridge from film production, injection molding, assembly manufacturing, internal packaging is in the whole process of 100,000 clean workshop. It is a cost-effective product and is widely used in the chemical industry.
Features and Benefits
Self-produced materials, cost-effective
Broad chemical compatibility
High cleanliness
Excellent heat resistance makes high temperature sterilization safer and more effective
Application
Filtration of oily fluids such as silicone oil
Organic solvent filtration
Materials of Construction
Membrane：Nylon
Cage & Support & End Caps：PP
O-rings/Gasket：Silicone/Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.62 m2 /10”
Dimensions
Outer Diameter：68mm
Length（in）：10, 20, 30, 40
Removal Ratings (μm)
0.1，0.22，0.45，1.0，3.0，5.0
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCN | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |
