Availability: | |
---|---|
Quantity: | |
Polyethersulfone (PES)
Fine Chemical
The FCS series filter cartridge is made of hydrophilic PES membrane, which has great heat resistance. The filter cartridge has excellent corrosion resistance and can withstand common acids, alkalis and chemical solvents. It is widely used for fluid filtration in the chemical industry.
Features and Benefits
Naturally PES membrane
Long service life and superior dirt-holding capacity
Easy to be wet
Excellent heat resistance makes high temperature sterilization safer and more effective
Application
Filtration of acid-base process fluids
Filtration of high purity chemicals
Filtration of industrial high purity water
Materials of Construction
Membrane: PES
Cage &Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV/ Butyronitrile/ PTFE gasket (hard) / PTFE gasket (soft)
Performance Characteristics
PP<60℃
PP with stainless steel lined end cap<85℃
PP with stainless steel lining<95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
pH range:1--14
Filtration Area
≥0.6 m2 /10”
Dimensions
Outer Diameter: 68mm/70mm
Length(in): 10, 20, 30, 40
Removal Ratings (μm)
0.03, 0.1, 0.22, 0.45, 0.8, 1.2
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCS | 003=0.03 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
01=0.1 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
022=0.22 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
045=0.45 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
08=0.8 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
1=1.2 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |
The FCS series filter cartridge is made of hydrophilic PES membrane, which has great heat resistance. The filter cartridge has excellent corrosion resistance and can withstand common acids, alkalis and chemical solvents. It is widely used for fluid filtration in the chemical industry.
Features and Benefits
Naturally PES membrane
Long service life and superior dirt-holding capacity
Easy to be wet
Excellent heat resistance makes high temperature sterilization safer and more effective
Application
Filtration of acid-base process fluids
Filtration of high purity chemicals
Filtration of industrial high purity water
Materials of Construction
Membrane: PES
Cage &Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV/ Butyronitrile/ PTFE gasket (hard) / PTFE gasket (soft)
Performance Characteristics
PP<60℃
PP with stainless steel lined end cap<85℃
PP with stainless steel lining<95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
pH range:1--14
Filtration Area
≥0.6 m2 /10”
Dimensions
Outer Diameter: 68mm/70mm
Length(in): 10, 20, 30, 40
Removal Ratings (μm)
0.03, 0.1, 0.22, 0.45, 0.8, 1.2
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCS | 003=0.03 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
01=0.1 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
022=0.22 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
045=0.45 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
08=0.8 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
1=1.2 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |