 |
| Quantity: | |
|---|---|
Polytetrafluoroethylene (PTFE)
Fine Chemical
The series of filter cartridge adopts PTFE membrane as the filter layer, the skeleton and support layer are all PFA, and the sealing ring is fluorine-covered. It has excellent chemical compatibility and can meet almost all the harsh fluid filtration conditions in the industry process. Each filter cartridge passes the integrity test before leaving the factory, so that the quality filter is guaranteed.
Features and Benefits
Hydrophobic/hydrophilic PTFE membrane
The framework and support layer are PFA, and the sealing ring is made of fluorine material
Excellent chemical compatibility
Excellent resistance to high temperature and high pressure
Application
Filtration of strong acids and bases
Filtration of highly corrosive polar solvents in the production of apis
High temperature fluid refining filtration in industrial production under operating conditions above 100℃
Materials of Construction
Membrane: hydrophobic/hydrophilic PTFE
Cage & Support & End Caps: PFA
O-rings/Gasket: TEV
Performance Characteristics
Maximum Operating Temperature 160℃
Maximum Forward 4.2bar/60℃
Differential Pressure 3.2bar/110℃
1.5bar/160℃
Filtration Area
≥0.6 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.05，0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCT | 005=0.05 | A=222/Fin | 02=2.5" | P=PP | F | V= Viton |
01=0.1 | B=222/Flat | 05=5" | B=PBT | T= TEV | ||
022=0.22 | C=226/Fin | 1=10" | V=PVDF | N=Butyronitrile | ||
045=0.45 | D=226/Flat | 2=20" | F=PFA | F=PTFE gasket (hard) | ||
1=1.0 | E=DOE/Flat | 3=30" | M=PE | M=PTFE gasket (soft) | ||
3=3.0 | F=215/Fin | 4=40" | G=GF | |||
5=5.0 | G=215/Flat | |||||
10=10 |
The series of filter cartridge adopts PTFE membrane as the filter layer, the skeleton and support layer are all PFA, and the sealing ring is fluorine-covered. It has excellent chemical compatibility and can meet almost all the harsh fluid filtration conditions in the industry process. Each filter cartridge passes the integrity test before leaving the factory, so that the quality filter is guaranteed.
Features and Benefits
Hydrophobic/hydrophilic PTFE membrane
The framework and support layer are PFA, and the sealing ring is made of fluorine material
Excellent chemical compatibility
Excellent resistance to high temperature and high pressure
Application
Filtration of strong acids and bases
Filtration of highly corrosive polar solvents in the production of apis
High temperature fluid refining filtration in industrial production under operating conditions above 100℃
Materials of Construction
Membrane: hydrophobic/hydrophilic PTFE
Cage & Support & End Caps: PFA
O-rings/Gasket: TEV
Performance Characteristics
Maximum Operating Temperature 160℃
Maximum Forward 4.2bar/60℃
Differential Pressure 3.2bar/110℃
1.5bar/160℃
Filtration Area
≥0.6 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.05，0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCT | 005=0.05 | A=222/Fin | 02=2.5" | P=PP | F | V= Viton |
01=0.1 | B=222/Flat | 05=5" | B=PBT | T= TEV | ||
022=0.22 | C=226/Fin | 1=10" | V=PVDF | N=Butyronitrile | ||
045=0.45 | D=226/Flat | 2=20" | F=PFA | F=PTFE gasket (hard) | ||
1=1.0 | E=DOE/Flat | 3=30" | M=PE | M=PTFE gasket (soft) | ||
3=3.0 | F=215/Fin | 4=40" | G=GF | |||
5=5.0 | G=215/Flat | |||||
10=10 |
