 |
| Quantity: | |
|---|---|
Polyvinylidene fluoride (PVDF)
Fine Chemical
This series of filter cartridge is made of PVDF membrane with high flux and high flow rate. Its integrity testing before leaving the factory ensures high product quality.
Features and Benefits
Natural hydrophobic
Extensive chemical compatibility
Low precipitate
High dirty-holding
Application
Filtration of organic solvents
Filtration of industrial gases
Materials of Construction
Membrane: Hydrophobic PVDF
Cage & Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.62 m2 /10”
Dimensions
Outer Diameter: 68mm/70mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.1, 0.22, 0.45, 1.0, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCT | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |
This series of filter cartridge is made of PVDF membrane with high flux and high flow rate. Its integrity testing before leaving the factory ensures high product quality.
Features and Benefits
Natural hydrophobic
Extensive chemical compatibility
Low precipitate
High dirty-holding
Application
Filtration of organic solvents
Filtration of industrial gases
Materials of Construction
Membrane: Hydrophobic PVDF
Cage & Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.62 m2 /10”
Dimensions
Outer Diameter: 68mm/70mm
Length（in）: 10, 20, 30, 40
Removal Ratings (μm)
0.1, 0.22, 0.45, 1.0, 3.0, 5.0
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FCT | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |
