 |
| Quantity: | |
|---|---|
Polyvinylidene fluoride (PVDF)
Pharmaceutical
This series of filter cartridge is made of hydrophilic PVDF filter membrane with high flux and high flow rate. The integrity test before delivery ensures the high quality of the product. The low protein adsorption performance of PVDF membrane makes the filter cartridge suitable for the sterilization filtration of various biological products. Greatly improve the convenience of use.
Features and Benefits
Pure PVDF membrane, lower lysate
High flow rate, long service life
Permanent and stable hydrophilic modification
Pure water can be used as the integrity test wetting fluid
Great heat resistance
Low protein adsorption
Application
Bactericidal filtration of protein drugs
Culture-medium debacteria filtration
Bacteria-reducing and bacteria-eliminating filtration of blood products
Filtration of animal liquid preparations
Debacterialization and filtration of peptide products
Materials of Construction
Membrane: Hydrophilic PVDF
Cage & Support & End Caps: PP
Drainage: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Steam sterilization 123℃@30min
pH range: 2-10
Filtration Area
≥0.62 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Pore Size (μm)
0.22, 0.45, 1.0, 0.22+0.22, 0.22+0.45
Biosafety
Endotoxin:＜0.25EU/ml
Extractable: ≤50mg/10 in
Integrity Test (BP, Water@23℃)
0.22μm≥2.4bar
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FPVL | 022=0.22 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
045=0.45 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
1=1.2 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
0202=0.22+0.22 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
0245=0.22+0.45 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | |||
G=215/Flat | M=PTFE gasket (soft) |
This series of filter cartridge is made of hydrophilic PVDF filter membrane with high flux and high flow rate. The integrity test before delivery ensures the high quality of the product. The low protein adsorption performance of PVDF membrane makes the filter cartridge suitable for the sterilization filtration of various biological products. Greatly improve the convenience of use.
Features and Benefits
Pure PVDF membrane, lower lysate
High flow rate, long service life
Permanent and stable hydrophilic modification
Pure water can be used as the integrity test wetting fluid
Great heat resistance
Low protein adsorption
Application
Bactericidal filtration of protein drugs
Culture-medium debacteria filtration
Bacteria-reducing and bacteria-eliminating filtration of blood products
Filtration of animal liquid preparations
Debacterialization and filtration of peptide products
Materials of Construction
Membrane: Hydrophilic PVDF
Cage & Support & End Caps: PP
Drainage: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Steam sterilization 123℃@30min
pH range: 2-10
Filtration Area
≥0.62 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Pore Size (μm)
0.22, 0.45, 1.0, 0.22+0.22, 0.22+0.45
Biosafety
Endotoxin:＜0.25EU/ml
Extractable: ≤50mg/10 in
Integrity Test (BP, Water@23℃)
0.22μm≥2.4bar
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FPVL | 022=0.22 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
045=0.45 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
1=1.2 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
0202=0.22+0.22 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
0245=0.22+0.45 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | |||
G=215/Flat | M=PTFE gasket (soft) |
