 |
| Quantity: | |
|---|---|
Glass fiber (GF)
Pharmaceutical
The FPG series filter cartridge is made of ultrafine glass fiber, with high throughput, high adsorption characteristics, excellent adsorption and filtration effect on oil and gel substances. Inorganic glass material, filter organic solvent chemicals have obvious advantages.
Features and Benefits
Ultrafine glass fiber material with absorbability
High dirt-holding and excellent particle retention efficiency
Cost-effective and long service life
Especially suitable for pre-treatment of liquids containing colloids and high viscosity
Application
Suspension gel-like liquid filtration
Prefiltration of pharmaceutical and biological products
Materials of Construction
Filter Media: Glass fiber
Cage & Support & End Caps: PP
Drainage：PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.38 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Pore Size (μm)
0.45, 1.0, 3.0, 5.0
Biosafety
Endotoxin:＜0.25EU/ml
Extractable: ≤50mg/10 in
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FPG | 045=0.45 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
1=1.0 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
3=3.0 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
5=5.0 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | |||
F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | |||
G=215/Flat | M=PTFE gasket (soft) |
The FPG series filter cartridge is made of ultrafine glass fiber, with high throughput, high adsorption characteristics, excellent adsorption and filtration effect on oil and gel substances. Inorganic glass material, filter organic solvent chemicals have obvious advantages.
Features and Benefits
Ultrafine glass fiber material with absorbability
High dirt-holding and excellent particle retention efficiency
Cost-effective and long service life
Especially suitable for pre-treatment of liquids containing colloids and high viscosity
Application
Suspension gel-like liquid filtration
Prefiltration of pharmaceutical and biological products
Materials of Construction
Filter Media: Glass fiber
Cage & Support & End Caps: PP
Drainage：PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.38 m2 /10”
Dimensions
Outer Diameter: 68mm
Length（in）: 10, 20, 30, 40
Pore Size (μm)
0.45, 1.0, 3.0, 5.0
Biosafety
Endotoxin:＜0.25EU/ml
Extractable: ≤50mg/10 in
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FPG | 045=0.45 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
1=1.0 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
3=3.0 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
5=5.0 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | |||
F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | |||
G=215/Flat | M=PTFE gasket (soft) |
