 |
| Quantity: | |
|---|---|
Polytetrafluoroethylene (PTFE)
Pharmaceutical
This series of filter cartridge is made of hydrophobic PTFE membrane, using a unique production process, with excellent resistance to organic and natural hydrophobicity. The filter cartridge has good heat resistance and can withstand multiple high temperature steam sterilization. Each filter cartridge is tested for integrity before leaving the factory.
Features and Benefits
High retention PTFE membrane
High purity raw material, low dissolution
Complete physical, chemical and biological safety data
Excellent heat resistance
Good corrosion resistance
Application
Compressed air, compressed nitrogen dust removal, bacteria filtration
Tank respirator filter element
Air filter for sterilization cabinet and dry machine
Materials of Construction
Membrane: Hydrophobic PTFE
Cage & Support & End Caps: PP
Drainage: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Steam sterilization 123℃@30min
Pore Size (μm)
0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10
Filtration Area
≥0.6 m2 /10”
Dimensions
Outer Diameter: 68mm/70mm
Length（in）: 10, 20, 30, 40
Integrity Test (BP, 95%ethanol@23℃)
0.1μm≥1.0bar
0.22μm≥0.9bar
0.45μm≥0.3bar
Biosafety
Endotoxin:＜0.25EU/ml
Extractable: ≤50mg/10 in
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FPT | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
10=10.0 | G=215/Flat | M=PTFE gasket (soft) |
This series of filter cartridge is made of hydrophobic PTFE membrane, using a unique production process, with excellent resistance to organic and natural hydrophobicity. The filter cartridge has good heat resistance and can withstand multiple high temperature steam sterilization. Each filter cartridge is tested for integrity before leaving the factory.
Features and Benefits
High retention PTFE membrane
High purity raw material, low dissolution
Complete physical, chemical and biological safety data
Excellent heat resistance
Good corrosion resistance
Application
Compressed air, compressed nitrogen dust removal, bacteria filtration
Tank respirator filter element
Air filter for sterilization cabinet and dry machine
Materials of Construction
Membrane: Hydrophobic PTFE
Cage & Support & End Caps: PP
Drainage: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP＜60℃
PP with stainless steel lined end cap＜85℃
PP with stainless steel lining＜95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Steam sterilization 123℃@30min
Pore Size (μm)
0.1, 0.22, 0.45, 1.0, 3.0, 5.0, 10
Filtration Area
≥0.6 m2 /10”
Dimensions
Outer Diameter: 68mm/70mm
Length（in）: 10, 20, 30, 40
Integrity Test (BP, 95%ethanol@23℃)
0.1μm≥1.0bar
0.22μm≥0.9bar
0.45μm≥0.3bar
Biosafety
Endotoxin:＜0.25EU/ml
Extractable: ≤50mg/10 in
Typical Liquid Flow Rate
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FPT | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
10=10.0 | G=215/Flat | M=PTFE gasket (soft) |
