Availability: | |
---|---|
Quantity: | |
Nylon
Microelectronics
The manufacture process of FEN series filter cartridge from film production, injection molding, assembly manufacturing, internal packaging is in the whole process of 100,000 clean workshop. It is a cost-effective product and is widely used in microelectronics.
Features and Benefits
Self-produced materials, cost-effective
Broad chemical compatibility
High cleanliness
Excellent heat resistance makes high temperature sterilization safer and more effective
Application
DI water filtration in advanced semiconductor manufacturing
Terminal filtration in wet cleaning applications of semiconductor
Terminal filtration for weak acids and bases and other solvents
Materials of Construction
Membrane:Nylon
Cage & Support & End Caps:PP
O-rings/Gasket:Silicone/Viton /EPDM/TEV
Performance Characteristics
PP<60℃
PP with stainless steel lined end cap<85℃
PP with stainless steel lining<95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.62 m2 /10”
Typical Liquid Flow Rate
Dimensions
Outer Diameter:68mm
Length(in):10, 20, 30, 40
Removal Ratings (μm)
0.1,0.22,0.45,1.0,3.0,5.0
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FEN | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |
The manufacture process of FEN series filter cartridge from film production, injection molding, assembly manufacturing, internal packaging is in the whole process of 100,000 clean workshop. It is a cost-effective product and is widely used in microelectronics.
Features and Benefits
Self-produced materials, cost-effective
Broad chemical compatibility
High cleanliness
Excellent heat resistance makes high temperature sterilization safer and more effective
Application
DI water filtration in advanced semiconductor manufacturing
Terminal filtration in wet cleaning applications of semiconductor
Terminal filtration for weak acids and bases and other solvents
Materials of Construction
Membrane:Nylon
Cage & Support & End Caps:PP
O-rings/Gasket:Silicone/Viton /EPDM/TEV
Performance Characteristics
PP<60℃
PP with stainless steel lined end cap<85℃
PP with stainless steel lining<95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.62 m2 /10”
Typical Liquid Flow Rate
Dimensions
Outer Diameter:68mm
Length(in):10, 20, 30, 40
Removal Ratings (μm)
0.1,0.22,0.45,1.0,3.0,5.0
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FEN | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | B= Interface lining steel | S= Silicone |
022=0.22 | B=222/Flat | 05=5" | B=PBT | C= Fully lining | E= EPDM | |
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
1=1.2 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
3=3.0 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
5=5.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
G=215/Flat | M=PTFE gasket (soft) |