Availability: | |
---|---|
Quantity: | |
Polytetrafluoroethylene (PTFE)
Microelectronics
This series of filter cartridge is made of PTFE membrane, using a unique production process, with excellent resistance to organic and inorganic chemical corrosion and natural hydrophobicity. It can be used for the filtration of strong solvents, strong corrosive liquids and strong oxidizing liquids.
Features and Benefits
High retention PTFE membrane
High purity raw material, low dissolution
Excellent heat resistance
Great corrosion resistance
Application
Terminal filtration for chemicals in semiconductor, display and data storage
Terminal filtration for photo resist, developer and etching
High purity chemical terminal filtration
Materials of Construction
Membrane: Hydrophobic PTFE
Cage &Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP<60℃
PP with stainless steel lined end cap<85℃
PP with stainless steel lining<95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.6 m2 /10”
Typical Liquid Flow Rate
Dimensions
Outer Diameter: 68mm/70mm
Length(in): 10, 20, 30, 40
Removal Ratings (μm)
0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FET | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | S= Silicone | |
022=0.22 | B=222/Flat | 05=5" | B=PBT | E= EPDM | ||
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
065=0.65 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
1=1.2 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
3=3.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
5=5.0 | G=215/Flat | M=PTFE gasket (soft) |
This series of filter cartridge is made of PTFE membrane, using a unique production process, with excellent resistance to organic and inorganic chemical corrosion and natural hydrophobicity. It can be used for the filtration of strong solvents, strong corrosive liquids and strong oxidizing liquids.
Features and Benefits
High retention PTFE membrane
High purity raw material, low dissolution
Excellent heat resistance
Great corrosion resistance
Application
Terminal filtration for chemicals in semiconductor, display and data storage
Terminal filtration for photo resist, developer and etching
High purity chemical terminal filtration
Materials of Construction
Membrane: Hydrophobic PTFE
Cage &Support & End Caps: PP
O-rings/Gasket: Silicone /Viton /EPDM/TEV
Performance Characteristics
PP<60℃
PP with stainless steel lined end cap<85℃
PP with stainless steel lining<95℃
Positive/Reverse pressure resistance 4bar/2bar (23℃)
Filtration Area
≥0.6 m2 /10”
Typical Liquid Flow Rate
Dimensions
Outer Diameter: 68mm/70mm
Length(in): 10, 20, 30, 40
Removal Ratings (μm)
0.1, 0.22, 0.45, 0.65, 1.0, 3.0, 5.0
Ordering Information
Series | Rating(μm) | End Cap | Length(in) | Support | Port | Seal |
FET | 01=0.1 | A=222/Fin | 02=2.5" | P=PP | S= Silicone | |
022=0.22 | B=222/Flat | 05=5" | B=PBT | E= EPDM | ||
045=0.45 | C=226/Fin | 1=10" | V=PVDF | D= Skeleton lining | V= Viton | |
065=0.65 | D=226/Flat | 2=20" | F=PFA | T= TEV | ||
1=1.2 | E=DOE/Flat | 3=30" | M=PE | N=Butyronitrile | ||
3=3.0 | F=215/Fin | 4=40" | G=GF | F=PTFE gasket (hard) | ||
5=5.0 | G=215/Flat | M=PTFE gasket (soft) |